The passenger side door of the van showing the sink cabinet and storage unit.
In trying to learn how to use WordPress’s block editor, I accidentally deleted the page where I had originally posted my first van photos while I was trying to edit the page.
So I apologize to everyone who has already seen them. I will just repost the photos, and hopefully move on to my usual ramblings in future posts. I did post a couple of new “before” photos. Thanks for your patience. ❤️
The little wash stand was originally a $99 table with 2 slatted shelves, also from Amazon. Since it wouldn’t fit over the wheel wells, I cut it up and used the pieces to build the sink stand with fresh water underneath, and a gray water container on the bottom. I covered the gray water bottle with a slipcover,so I wouldn’t have to look at the dirty water. I used the extra wood for the top and shelf, and had wood left over to frame the refrigerator and build a small shelf behind the wash stand.I have built camper beds before, but I hated sleeping on a plywood slab. This time I went with a cot that had springs and added a cushy mattress. The narrow width doesn’t bother me as I was used to sleeping on the dinette bed in our Casita. I had to add riser legs so the porta pot would fit under the bed.My only A/C wiring is a power strip that attaches to an extension cord through a hole I cut in the floor behind the driver’s seat.With the van shut up at night there is no ventilation. Static Camper Van on YouTube gave me the idea of putting a ventilation hole in the floor. So I installed a deckplate in the only place where there was space under the van for a hole that large. With the deck plate open and the fan on exhaust, the ventilation is awesome!Another van photo. This shows a close-up of my fresh and grey water supply, sink stand, along with a folding dishpan/tote sandwiched between the stand and the refrigerator.This is the 120 watt portable solar panel stowed behind the passenger seat.Here’s the hole behind the driver’s seat for the electric cord. I plan to stuff one of those plastic mesh pot scrubbers around the cord to keep out bugs.
Update: Linneth, a dear reader, suggested using a pool noodle around the wire, stuffed into the hole. Eureka!My van build pictures wouldn’t be complete without another photo of my best buddy!